Watchface: DblTime dual date & time watchface for world travelers

Credits:

Many thanks to orviwan . . . I started this app/watchface using his 91dub code as a base & built mine from there !!

Features (currently v1.3):

dual date & time displays
can adjust # hours offset (-23 to +23) between primary & secondary time displays - default=0
when # hours offset = 0, secondary date & time are not displayed
can enable/disable snooze mode (display blanks after 10 seconds) - default=enabled
can enable/disable hourly chime (buzzes on the hour) - default=disabled
displays 12H/24H format time (using current Pebble Settings)

Operating Instructions:

to enter "set mode" (snooze), long-press the "select" (middle) button (Z's blink)
with "set mode" on "snooze", press the "up" & "down" buttons to toggle between "enable" & "disable"
to change "set mode" to "chime", long-press the "select" button (bell blinks)
with "set mode" on "chime", press the "up" & "down" buttons to toggle between "enable" & "disable"
to change "set mode" to "month-day", long-press the "select" button (MD/DM blinks)
with "set mode" on "month-day", press the "up" & "down" buttons to toggle between mm/dd/yy & dd/mm/yy
to change "set mode" to "offset", long-press the "select" button (TZ blinks)
with "set mode" on "offset", press the "up" & "down" buttons to adjust the offset value
with "set mode" on "offset", press the "select" button to force the offset back to 0
to exit "set mode", long-press the "select" button (nothing blinking)
with "snooze" mode activated (display blank), press the "up" or "down" buttons to repaint the display