<http://www.mypebblefaces.com/download.php?fID=1867&version=1.0 (initial release)&uID=1977&link=1>
Credits:
Many thanks to orviwan . . . I started this app/watchface using his 91dub code as a base & built mine from there !!
Features:
- dual date & time displays
- can adjust # hours offset (-11 to +14) between primary & secondary time displays - default=0
- when # hours offset = 0, secondary date & time are not displayed
- can enable/disable snooze mode (display blanks after 10 seconds) - default=enabled
- can enable/disable hourly chime (buzzes on the hour) - default=disabled
- displays 12H/24H format time (using current Pebble Settings)
Operating Instructions:
- to enter "set mode" (snooze), long-press the "select" (middle) button (Z's blink)
- with "set mode" on "snooze", press the "up" & "down" buttons to toggle between "enable" & "disable"
- to change "set mode" to "chime", long-press the "select" button (bell blinks)
- with "set mode" on "chime", press the "up" & "down" buttons to toggle between "enable" & "disable"
- to change "set mode" to "offset", long-press the "select" button (TZ blinks)
- with "set mode" on "offset", press the "up" & "down" buttons to adjust the offset value
- with "set mode" on "offset", press the "select" button to force the offset back to 0 (w/ current firmware bug, my take two "select" presses)
- to exit "set mode", long-press the "select" button (nothing blinking)
- with "snooze" mode activated (display blank), press the "up" or "down" buttons to repaint the display